Getting Started
Information to Provide
Uploading Data
Raptor App
Raptor Mobile App
Instant Inspections
Instant Inspections - Data Notes
Sharing Reports & Settings
Drone Service Providers & Info
Aerial Thermography Ops — General
Aerial Thermography Ops — Drones
Aerial Thermography Ops — Manned Aircraft
Order Type & Order Status
Order Type & Order Status
Order Type & Order Status
Order Type & Order Status
Order Type & Order Status
Search…
Please see the table below for definitions of Order Types and Order Statuses respectively.
Order Type
Definition
Site Digitization
Site Digitization orders initiate the digitization of equipment based on the site layout you provide. Once completed, you will have a digital twin of your solar asset. These orders are typically only necessary when you wish to access the digital twin prior to receiving the first inspection report for a site.
Standard
Standard level aerial inspections balance altitude, speed, and granular site data, from high level inverter issues down to sub-module hot spots.
Comprehensive
Comprehensive level aerial IR inspections are performed in compliance with IEC standards. It provides highly detailed, sub-module-level granular data and allows teams to thoroughly understand the performance of each PV module. This inspection level offers temperate deltas and enables accurate sorting and prioritization of both module and string-level anomalies by temperature intensity.
Overview
An Overview inspection is flown at the highest altitude and allows for string, inverter and combiner issues to be identified.
Construction
Construction Monitoring inspections collect and analyze data on construction progress, helping you verify contractor reports, and identify and prevent project delays.
Erosion
Erosion inspections identify any signs of source, structural or surface erosion, as well as water management issues and vegetation health.
Instant
(For Distributed Generation only) Instant Inspections return analysis on self-collected drone imagery within a very quick timeframe, highlighting the most high priority anomalies for same-day remediation
POI
POI inspections focus on the point of interconnection (POI) to ensure that the connection between a solar power system and the electrical grid is safe, compliant, and ready for operation.
Substation
Substation inspections focus on the substation and identify any issues related to operational safety and mitigate the risk of site-wide outages
Vegetation
Vegetation inspections analyze the growth and health of vegetation across a site and highlight any impacts to power generation at the equipment-level.
Wiring
Wiring inspections analyze the health of your equipment wiring and connectors.
Order Type
Definition
Site Digitization
Site Digitization orders initiate the digitization of equipment based on the site layout you provide. Once completed, you will have a digital twin of your solar asset. These orders are typically only necessary when you wish to access the digital twin prior to receiving the first inspection report for a site.
Standard
Standard level aerial inspections balance altitude, speed, and granular site data, from high level inverter issues down to sub-module hot spots.
Comprehensive
Comprehensive level aerial IR inspections are performed in compliance with IEC standards. It provides highly detailed, sub-module-level granular data and allows teams to thoroughly understand the performance of each PV module. This inspection level offers temperate deltas and enables accurate sorting and prioritization of both module and string-level anomalies by temperature intensity.
Overview
An Overview inspection is flown at the highest altitude and allows for string, inverter and combiner issues to be identified.
Construction
Construction Monitoring inspections collect and analyze data on construction progress, helping you verify contractor reports, and identify and prevent project delays.
Erosion
Erosion inspections identify any signs of source, structural or surface erosion, as well as water management issues and vegetation health.
Instant
(For Distributed Generation only) Instant Inspections return analysis on self-collected drone imagery within a very quick timeframe, highlighting the most high priority anomalies for same-day remediation
POI
POI inspections focus on the point of interconnection (POI) to ensure that the connection between a solar power system and the electrical grid is safe, compliant, and ready for operation.
Substation
Substation inspections focus on the substation and identify any issues related to operational safety and mitigate the risk of site-wide outages
Vegetation
Vegetation inspections analyze the growth and health of vegetation across a site and highlight any impacts to power generation at the equipment-level.
Wiring
Wiring inspections analyze the health of your equipment wiring and connectors.
Order Type
Definition
Site Digitization
Site Digitization orders initiate the digitization of equipment based on the site layout you provide. Once completed, you will have a digital twin of your solar asset. These orders are typically only necessary when you wish to access the digital twin prior to receiving the first inspection report for a site.
Standard
Standard level aerial inspections balance altitude, speed, and granular site data, from high level inverter issues down to sub-module hot spots.
Comprehensive
Comprehensive level aerial IR inspections are performed in compliance with IEC standards. It provides highly detailed, sub-module-level granular data and allows teams to thoroughly understand the performance of each PV module. This inspection level offers temperate deltas and enables accurate sorting and prioritization of both module and string-level anomalies by temperature intensity.
Overview
An Overview inspection is flown at the highest altitude and allows for string, inverter and combiner issues to be identified.
Construction
Construction Monitoring inspections collect and analyze data on construction progress, helping you verify contractor reports, and identify and prevent project delays.
Erosion
Erosion inspections identify any signs of source, structural or surface erosion, as well as water management issues and vegetation health.
Instant
(For Distributed Generation only) Instant Inspections return analysis on self-collected drone imagery within a very quick timeframe, highlighting the most high priority anomalies for same-day remediation
POI
POI inspections focus on the point of interconnection (POI) to ensure that the connection between a solar power system and the electrical grid is safe, compliant, and ready for operation.
Substation
Substation inspections focus on the substation and identify any issues related to operational safety and mitigate the risk of site-wide outages
Vegetation
Vegetation inspections analyze the growth and health of vegetation across a site and highlight any impacts to power generation at the equipment-level.
Wiring
Wiring inspections analyze the health of your equipment wiring and connectors.
Order Type
Definition
Site Digitization
Site Digitization orders initiate the digitization of equipment based on the site layout you provide. Once completed, you will have a digital twin of your solar asset. These orders are typically only necessary when you wish to access the digital twin prior to receiving the first inspection report for a site.
Standard
Standard level aerial inspections balance altitude, speed, and granular site data, from high level inverter issues down to sub-module hot spots.
Comprehensive
Comprehensive level aerial IR inspections are performed in compliance with IEC standards. It provides highly detailed, sub-module-level granular data and allows teams to thoroughly understand the performance of each PV module. This inspection level offers temperate deltas and enables accurate sorting and prioritization of both module and string-level anomalies by temperature intensity.
Overview
An Overview inspection is flown at the highest altitude and allows for string, inverter and combiner issues to be identified.
Construction
Construction Monitoring inspections collect and analyze data on construction progress, helping you verify contractor reports, and identify and prevent project delays.
Erosion
Erosion inspections identify any signs of source, structural or surface erosion, as well as water management issues and vegetation health.
Instant
(For Distributed Generation only) Instant Inspections return analysis on self-collected drone imagery within a very quick timeframe, highlighting the most high priority anomalies for same-day remediation
POI
POI inspections focus on the point of interconnection (POI) to ensure that the connection between a solar power system and the electrical grid is safe, compliant, and ready for operation.
Substation
Substation inspections focus on the substation and identify any issues related to operational safety and mitigate the risk of site-wide outages
Vegetation
Vegetation inspections analyze the growth and health of vegetation across a site and highlight any impacts to power generation at the equipment-level.
Wiring
Wiring inspections analyze the health of your equipment wiring and connectors.
Order Type
Definition
Site Digitization
Site Digitization orders initiate the digitization of equipment based on the site layout you provide. Once completed, you will have a digital twin of your solar asset. These orders are typically only necessary when you wish to access the digital twin prior to receiving the first inspection report for a site.
Standard
Standard level aerial inspections balance altitude, speed, and granular site data, from high level inverter issues down to sub-module hot spots.
Comprehensive
Comprehensive level aerial IR inspections are performed in compliance with IEC standards. It provides highly detailed, sub-module-level granular data and allows teams to thoroughly understand the performance of each PV module. This inspection level offers temperate deltas and enables accurate sorting and prioritization of both module and string-level anomalies by temperature intensity.
Overview
An Overview inspection is flown at the highest altitude and allows for string, inverter and combiner issues to be identified.
Construction
Construction Monitoring inspections collect and analyze data on construction progress, helping you verify contractor reports, and identify and prevent project delays.
Erosion
Erosion inspections identify any signs of source, structural or surface erosion, as well as water management issues and vegetation health.
Instant
(For Distributed Generation only) Instant Inspections return analysis on self-collected drone imagery within a very quick timeframe, highlighting the most high priority anomalies for same-day remediation
POI
POI inspections focus on the point of interconnection (POI) to ensure that the connection between a solar power system and the electrical grid is safe, compliant, and ready for operation.
Substation
Substation inspections focus on the substation and identify any issues related to operational safety and mitigate the risk of site-wide outages
Vegetation
Vegetation inspections analyze the growth and health of vegetation across a site and highlight any impacts to power generation at the equipment-level.
Wiring
Wiring inspections analyze the health of your equipment wiring and connectors.
Order Status
Definition
Info Needed
This Order requires you to provide additional information before the Raptor Maps team can proceed. Orders requiring submission will be in this status.
Submitted
An order has been submitted to Raptor Maps and is being reviewed.
Digitizing Site
The Raptor Maps team is creating a digital twin for your site.
Flight Date Needed
The Raptor Maps team needs a confirmed Flight Date within the approved Flight Window before this Order can proceed to data collection.
Awaiting Your Data
Raptor Maps is waiting for completion of a non-turnkey flight and for the data to be uploaded via the Data Upload link.
Awaiting Raptor Maps Flight
A flight date has be scheduled but the site has not been flown yet.
Data Uploading
The data has been captured and is being uploaded to the Raptor Solar system for review.
Checking Data
Raptor Maps is reviewing the uploaded data to ensure the imagery meets our quality standards.
Data Quality Issue
An issue has been identified by the Raptor Maps team and the site will need to be reflown. Examples of issues include:
A portion of the site missed in the imagery
Low irradiance
Images taken at the wrong angle / altitude
Please see our data requirements for more information.
Analyzing Data
The data has been successfully uploaded, checks completed and Raptor Maps is analyzing the data for anomalies.
Completed
The data has been fully analyzed and your inspection has been delivered.
Order Status
Definition
Info Needed
This Order requires you to provide additional information before the Raptor Maps team can proceed. Orders requiring submission will be in this status.
Submitted
An order has been submitted to Raptor Maps and is being reviewed.
Digitizing Site
The Raptor Maps team is creating a digital twin for your site.
Flight Date Needed
The Raptor Maps team needs a confirmed Flight Date within the approved Flight Window before this Order can proceed to data collection.
Awaiting Your Data
Raptor Maps is waiting for completion of a non-turnkey flight and for the data to be uploaded via the Data Upload link.
Awaiting Raptor Maps Flight
A flight date has be scheduled but the site has not been flown yet.
Data Uploading
The data has been captured and is being uploaded to the Raptor Solar system for review.
Checking Data
Raptor Maps is reviewing the uploaded data to ensure the imagery meets our quality standards.
Data Quality Issue
An issue has been identified by the Raptor Maps team and the site will need to be reflown. Examples of issues include:
A portion of the site missed in the imagery
Low irradiance
Images taken at the wrong angle / altitude
Please see our data requirements for more information.
Analyzing Data
The data has been successfully uploaded, checks completed and Raptor Maps is analyzing the data for anomalies.
Completed
The data has been fully analyzed and your inspection has been delivered.
Order Status
Definition
Info Needed
This Order requires you to provide additional information before the Raptor Maps team can proceed. Orders requiring submission will be in this status.
Submitted
An order has been submitted to Raptor Maps and is being reviewed.
Digitizing Site
The Raptor Maps team is creating a digital twin for your site.
Flight Date Needed
The Raptor Maps team needs a confirmed Flight Date within the approved Flight Window before this Order can proceed to data collection.
Awaiting Your Data
Raptor Maps is waiting for completion of a non-turnkey flight and for the data to be uploaded via the Data Upload link.
Awaiting Raptor Maps Flight
A flight date has be scheduled but the site has not been flown yet.
Data Uploading
The data has been captured and is being uploaded to the Raptor Solar system for review.
Checking Data
Raptor Maps is reviewing the uploaded data to ensure the imagery meets our quality standards.
Data Quality Issue
An issue has been identified by the Raptor Maps team and the site will need to be reflown. Examples of issues include:
A portion of the site missed in the imagery
Low irradiance
Images taken at the wrong angle / altitude
Please see our data requirements for more information.
Analyzing Data
The data has been successfully uploaded, checks completed and Raptor Maps is analyzing the data for anomalies.
Completed
The data has been fully analyzed and your inspection has been delivered.
Order Status
Definition
Info Needed
This Order requires you to provide additional information before the Raptor Maps team can proceed. Orders requiring submission will be in this status.
Submitted
An order has been submitted to Raptor Maps and is being reviewed.
Digitizing Site
The Raptor Maps team is creating a digital twin for your site.
Flight Date Needed
The Raptor Maps team needs a confirmed Flight Date within the approved Flight Window before this Order can proceed to data collection.
Awaiting Your Data
Raptor Maps is waiting for completion of a non-turnkey flight and for the data to be uploaded via the Data Upload link.
Awaiting Raptor Maps Flight
A flight date has be scheduled but the site has not been flown yet.
Data Uploading
The data has been captured and is being uploaded to the Raptor Solar system for review.
Checking Data
Raptor Maps is reviewing the uploaded data to ensure the imagery meets our quality standards.
Data Quality Issue
An issue has been identified by the Raptor Maps team and the site will need to be reflown. Examples of issues include:
A portion of the site missed in the imagery
Low irradiance
Images taken at the wrong angle / altitude
Please see our data requirements for more information.
Analyzing Data
The data has been successfully uploaded, checks completed and Raptor Maps is analyzing the data for anomalies.
Completed
The data has been fully analyzed and your inspection has been delivered.
Order Status
Definition
Info Needed
This Order requires you to provide additional information before the Raptor Maps team can proceed. Orders requiring submission will be in this status.
Submitted
An order has been submitted to Raptor Maps and is being reviewed.
Digitizing Site
The Raptor Maps team is creating a digital twin for your site.
Flight Date Needed
The Raptor Maps team needs a confirmed Flight Date within the approved Flight Window before this Order can proceed to data collection.
Awaiting Your Data
Raptor Maps is waiting for completion of a non-turnkey flight and for the data to be uploaded via the Data Upload link.
Awaiting Raptor Maps Flight
A flight date has be scheduled but the site has not been flown yet.
Data Uploading
The data has been captured and is being uploaded to the Raptor Solar system for review.
Checking Data
Raptor Maps is reviewing the uploaded data to ensure the imagery meets our quality standards.
Data Quality Issue
An issue has been identified by the Raptor Maps team and the site will need to be reflown. Examples of issues include:
A portion of the site missed in the imagery
Low irradiance
Images taken at the wrong angle / altitude
Please see our data requirements for more information.
Analyzing Data
The data has been successfully uploaded, checks completed and Raptor Maps is analyzing the data for anomalies.
Completed
The data has been fully analyzed and your inspection has been delivered.
Need to submit an inspection order? See here for instructions.
Links & Support
Stay Up to Date
Subscribe to our newsletter and stay informed about innovations in solar asset optimization, deploying robotics for solar, our research and testing with OEMs, the latest in our product development, and more.
Links & Support
Stay Up to Date
Subscribe to our newsletter and stay informed about innovations in solar asset optimization, deploying robotics for solar, our research and testing with OEMs, the latest in our product development, and more.
Links & Support
Stay Up to Date
Subscribe to our newsletter and stay informed about innovations in solar asset optimization, deploying robotics for solar, our research and testing with OEMs, the latest in our product development, and more.
Links & Support
Stay Up to Date
Subscribe to our newsletter and stay informed about innovations in solar asset optimization, deploying robotics for solar, our research and testing with OEMs, the latest in our product development, and more.
Links & Support
Stay Up to Date
Subscribe to our newsletter and stay informed about innovations in solar asset optimization, deploying robotics for solar, our research and testing with OEMs, the latest in our product development, and more.
This website uses cookies
This website stores cookies on your computer to track usage across media in accordance with our Privacy Policy.
This website uses cookies
This website stores cookies on your computer to track usage across media in accordance with our Privacy Policy.
This website uses cookies
This website stores cookies on your computer to track usage across media in accordance with our Privacy Policy.
This website uses cookies
This website stores cookies on your computer to track usage across media in accordance with our Privacy Policy.
This website uses cookies
This website stores cookies on your computer to track usage across media in accordance with our Privacy Policy.